IP Address Assignment: Most ISP's provide a dynamic IP address to residential subscribers. If you are unsure of the encapsulation parameters used by your ISP, leave this option set to "Ethernet". ISP Parameters: Encapsulation options include Ethernet, PPP over Ethernet (PPPoE), PPTP and/or L2TP. Set the ISP Parameters for the internet connection and IP Address Assignment. Please refer to the "Troubleshooting Tips" at the end of this guide. Note: If the "Installation Setup Wizard" does not appear when you login, run the wizard manually. Click Next to run the wizard setup for internet access. Follow the prompts to setup the WAN port connection. The initial setup wizard will appear when attempting to access the WebUI for the first time. Enter a new administrative password and click the Apply button to save the change. The following screen will prompt to update the administrator password. If this is the first time setting up the device and it is not accepting the "1234" password, please press the RESET button on the device (located in rear panel) and hold it down for 10-15 seconds. Note: If the default password has been changed, use the new password to login. Click the Login button to enter the WebUI. When prompted for user credentials, type admin for the "User Name" and 1234 for the "Password".
On the address bar please type to access the WebUI. To access the ZLD web configuration page please open a web browser on your computer (Internet Explorer, Mozilla Firefox, Google Chrome, etc.). Connect the DSL/Cable modem to the device, P2.Connect a computer to a LAN port on the device, P4.Press the power button to turn the device ON (router takes 3-4 minutes to power up).
This guide covers first time setup for internet access on ZLD capable devices.īefore we begin the internet (WAN) setup on the ZLDL router, the following steps need to be completed.
0 kommentar(er)
